Galaxy System 3″ Resin Pads
Galaxy System Resin Pads Hand Grinder Tooling
- Item Number: SSP.27.005 DETAILS BELOW
Overview:
The SASE Galaxy System 3″ Resin Pads offer a revolutionary floor rejuvenation process, utilizing a 27” burnisher for wet and dry steps to achieve a high-gloss finish. Achieve stunning results with significantly lower equipment costs.
- WET USE
- POLISH
- DRY USE
Technical Data:
Item Number:
SC30.500240
SC30.500241
SC30.500242
SC30.500243
SC30.500244
SC30.500245
SC30.500246
Product:
SASE 3″ Resin Bond Grey – 50 Grit
SASE 3” Resin Bond Black – 100 Grit
SASE 3” Resin Bond Blue – 200 Grit
SASE 3” Resin Bond Red – 400 Grit
SASE 3” Resin Bond White – 800 Grit
SASE 3” Resin Bond Yellow – 1500 Grit
SASE 3” Resin Bond Green – 3000 Grit
Description:
Good Starting Point and can Remove a Cure and Seal on New Concrete. (Wet)
Can be a Starting Point if Floor is in Good Condition and There is no Cure and Seal to Remove. (Wet)
Removes 100 Grit Scratches and Leaves a Honed, Matte Finish. (Wet)
Remove 200 Grit Scratches and Leaves a Honed, Slightly Matte Finish. (Wet)
Removes 400 Grit Scratches and Leaves a Slightly Shiny Finish. Can be the Final Step if Required. (Dry)
Removes 800 Grit Scratches and Leaves a Shiny Finish. Can be the Final Step if Required. (Dry)
Removes 1500 Grit Scratches and Leaves a High Gloss Finished. The Final Step in System. (Dry)